New Juniper SRX5K-MPC3-100G10G SRX5000 Series Services Gateway

New Juniper SRX5K-MPC3-100G10G SRX5000 Series Services Gateway

Overview

The Juniper SRX5K-MPC3-100G10G is a high-performance, modular interface card (MPC) designed for Juniper’s SRX5000 Series Services Gateways, such as the SRX5400, SRX5600, and SRX5800. This MPC provides high-speed 10GbE and 100GbE connectivity and is optimized for data centers, service providers, and large enterprises that require secure and scalable networking with advanced security services.

The Juniper SRX5K-MPC3-100G10G is a high-performance, modular interface card designed for the SRX5000 series services gateways. It offers high-speed 10GbE and 100GbE connectivity, making it an ideal choice for service providers, large enterprises, and data centers requiring secure, scalable networking with robust security features such as firewall, IPS, and VPN services.

Specifications

• Model: SRX5K-MPC3-100G10G
• Series: Juniper SRX5000 Series Modular Services Gateways
• Type: Modular Interface Card (MPC) for high-speed Ethernet interfaces
• Chassis Compatibility: Compatible with Juniper SRX5000 Series chassis (SRX5400, SRX5600, and SRX5800).

2. Interfaces and Ports

• 100GbE Ports:
  • 2 x 100GbE QSFP28 interfaces.
  • Each port supports full 100 Gigabit Ethernet speeds and can be used for uplinks or core connectivity.
• 10GbE Ports:
  • 4 x 10GbE SFP+ interfaces.
  • Each SFP+ port supports full 10 Gigabit Ethernet speeds for high-speed access or aggregation.
• Breakout Support:
  • The 100GbE QSFP28 ports support 4x25GbE breakout configurations with appropriate breakout cables.

3. Performance

• Total Throughput: Provides up to 240 Gbps of throughput, supporting high-performance data forwarding and advanced security services.
• Packet Forwarding: Optimized for high-speed packet forwarding with low latency, making it ideal for environments that require fast and secure data transmission.
• Advanced Security: Leverages Juniper's powerful security services such as IPS, firewall, VPN, and more.

4. Services and Features

• Layer 2 and Layer 3 Forwarding: Full support for Layer 2 switching and Layer 3 routing capabilities, including:
  • IPv4 and IPv6 routing.
  • MPLS (Multiprotocol Label Switching).
  • BGP, OSPF, RIP, and IS-IS for dynamic routing.
• Firewall Services: Provides stateful firewall services with advanced protection mechanisms, including support for dynamic policies.
• Intrusion Prevention System (IPS): Advanced IPS capabilities for detecting and preventing security threats.
• VPN Services: Full support for IPsec VPNs, including site-to-site and remote access VPNs.
• NAT: Supports Network Address Translation (NAT) services, including static NAT, dynamic NAT, and NAT64.

5. High Availability and Redundancy

• Redundant Configuration: The MPC is designed to operate in redundant configurations for high availability. It can work with other MPCs in active/standby or load-sharing modes to ensure uninterrupted service.
• Hot-Swappable: The MPC is hot-swappable, allowing for replacement or upgrades without taking the system offline.

6. Chassis Compatibility and Scaling

• Chassis: Compatible with the following Juniper SRX5000 series chassis:
  • SRX5400
  • SRX5600
  • SRX5800
• Slot Requirement: Occupies a single MPC slot in the SRX5000 series chassis.

7. Power and Environmental Specifications

• Power Consumption: Typical power consumption is approximately 500 watts.
• Operating Temperature: 32°F to 104°F (0°C to 40°C).
• Storage Temperature: -40°F to 158°F (-40°C to 70°C).
• Humidity: Operating humidity of 5% to 90% non-condensing.

8. Licensing and Software Features

• Licenses: Advanced security services such as IPS, anti-virus, and VPNs may require additional licensing depending on the deployment scenario.
• Operating System: Runs on Juniper’s Junos OS, providing a unified operating system for managing security and networking services across all Juniper devices.

9. Use Cases

• Data Center Edge and Core: Provides secure, high-speed connectivity for data center environments, ensuring efficient and secure traffic flow between network segments.
• Service Providers: Ideal for service providers that require high throughput and robust security services for edge and core deployments.
• Large Enterprises: Suitable for large enterprises needing high-capacity, secure connections between remote locations, branch offices, and the core network.
• Security Gateway: Functions as a secure gateway with advanced threat prevention and firewall services, making it an excellent solution for perimeter security in large network environments.

10. Key Features Summary

• 2 x 100GbE QSFP28 and 4 x 10GbE SFP+ ports for high-speed connectivity.
• Supports up to 240 Gbps throughput.
• Full Layer 2 and Layer 3 forwarding with support for MPLS, VPNs, and dynamic routing protocols.
• Provides stateful firewall, IPS, VPN, and NAT services.
• Hot-swappable, allowing for easy maintenance and upgrades.
• Compatible with Juniper SRX5000 series chassis, ideal for data centers and service providers.

Datasheet