Cisco
NEW Cisco C9800-L-C-K9 Catalyst 9800 (Copper Uplink) Controller - Supports 25 AP's
- MPN:
- C9800-L-C-K9
- Condition:
- New
- Shipping:
- Calculated at Checkout
Frequently bought together:
Description
C9800-L-C-K9-New Overview
The Cisco® Catalyst® 9800-L is a fixed wireless controller with seamless software updates for small and midsize enterprises.Built from the ground up for intent-based networking, the Cisco Catalyst 9800-L brings together Cisco IOS® XE Software and Cisco RF excellence to create a best-in-class wireless experience for your evolving and growing organization.Quick spec of C9800-L-C-K9-New
- Product Code : C9800-L-C-K9
- Description : Cisco Catalyst 9800-L Wireless Controller_Copper Uplink (ships with one AC Power Adapter)
- Dimensions (H x W x D) : 1.58 in. (4.02 cm) x8.5 in. (21.59 cm)x9.06 in. (23.01 cm)
- Maximum number of access points : 250
- Maximum number of clients : 5000
- Maximum throughput : 5 Gbps
- Maximum WLANs : 4096
- Maximum VLANs : 4096
- Fixed uplinks : 2x 10G/Multigigabit copper or 2x 10G/Multigigabit fiber
- Power supply : 110W, 12VDC, AC/DC adapter
- Maximum power consumption : 84.5W (assumes 2pc 2.5W SFP and with 4.5W USB load)
C9800-L-C-K9-New Specification
- Description :Cisco Catalyst 9800-L Wireless Controller_Copper Uplink (ships with one AC Power Adapter)
- Dimensions (H x W x D) :1.58 in. (4.02 cm) x8.5 in. (21.59 cm)x9.06 in. (23.01 cm)
- Maximum number of access points :250
- Maximum number of clients :5000
- Maximum throughput :5 Gbps
- Maximum WLANs :4096
- Maximum VLANs :4096
- Fixed uplinks :2x 10G/Multigigabit copper or 2x 10G/Multigigabit fiber
- Power supply :110W, 12VDC, AC/DC adapter
- Maximum power consumption :84.5W (assumes 2pc 2.5W SFP and with 4.5W USB load)
- Deployment modes :Centralized, Cisco FlexConnect®, and fabric
- Form factor :1RU; half-width chassis allows side-by-side installation in standard 19-in. rack
- License :Smart License enabled
- Software :Cisco IOS XE
- Management :Cisco DNA Center, Cisco Prime® Infrastructure, and third party (open standards APIs)
- Interoperability :AireOS-based controllers
- Access points :Cisco Aironet® 802.11ac Wave 1 and Wave 2 access points, Cisco Catalyst 9100 802.11ax access points
- Wireless :IEEE 802.11a, 802.11b, 802.11g, 802.11d, WMM/802.11e, 802.11h, 802.11n, 802.11k, 802.11r, 802.11u, 802.11w, 802.11ac Wave1 and Wave2, 802.11ax
- Wired, switching, and routing :IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX specification, 1000BASE-T, 1000BASE-SX, 1000-BASE-LH, IEEE 802.1Q VLAN tagging, IEEE 802.1AX Link Aggregation
- Data Requests For Comments (RFCs) :• RFC 768 UDP • RFC 791 IP • RFC 2460 IPv6 • RFC 792 ICMP • RFC 793 TCP • RFC 826 ARP • RFC 1122 Requirements for Internet Hosts • RFC 1519 CIDR • RFC 1542 BOOTP • RFC 2131 DHCP • RFC 5415 CAPWAP Protocol Specification • RFC 5416 CAPWAP Binding for 802.11
- Security standards :• Wi-Fi Protected Access (WPA) • IEEE 802.11i (WPA2, RSN) • RFC 1321 MD5 Message-Digest Algorithm • RFC 1851 ESP Triple DES Transform • RFC 2104 HMAC: Keyed-Hashing for Message Authentication • RFC 2246 TLS Protocol Version 1.0 • RFC 2401 Security Architecture for the Internet Protocol • RFC 2403 HMAC-MD5-96 within ESP and AH • RFC 2404 HMAC-SHA-1-96 within ESP and AH • RFC 2405 ESP DES-CBC Cipher Algorithm with Explicit IV • RFC 2407 Interpretation for ISAKMP • RFC 2408 ISAKMP • RFC 2409 IKE • RFC 2451 ESP CBC-Mode Cipher Algorithms • RFC 3280 Internet X.509 PKI Certificate and CRL Profile • RFC 4347 Datagram Transport Layer Security • RFC 5246 TLS Protocol Version 1.2
- Encryption :• Wired Equivalent Privacy (WEP) RC4 40, 104 and 128 bits (both static and shared keys) • Advanced Encryption Standard (AES): Cipher Block Chaining (CBC), Counter with CBC-MAC (CCM), Counter with Cipher Block Chaining Message Authentication Code Protocol (CCMP) • Data Encryption Standard (DES): DES-CBC, 3DES • Secure Sockets Layer (SSL) and Transport Layer Security (TLS): RC4 128-bit and RSA 1024- and 2048-bit • DTLS: AES-CBC • IPsec: DES-CBC, 3DES, AES-CBC • 802.1AE MACsec encryption
- Authentication, Authorization, and Accounting (AAA) :• IEEE 802.1X • RFC 2548 Microsoft Vendor-Specific RADIUS Attributes • RFC 2716 PPP EAP-TLS • RFC 2865 RADIUS Authentication • RFC 2866 RADIUS Accounting • RFC 2867 RADIUS Tunnel Accounting • RFC 2869 RADIUS Extensions • RFC 3576 Dynamic Authorization Extensions to RADIUS • RFC 5176 Dynamic Authorization Extensions to RADIUS • RFC 3579 RADIUS Support for EAP • RFC 3580 IEEE 802.1X RADIUS Guidelines • RFC 3748 Extensible Authentication Protocol (EAP) • Web-based authentication • TACACS support for management users
- Management :• Simple Network Management Protocol (SNMP) v1, v2c, v3 • RFC 854 Telnet • RFC 1155 Management Information for TCP/IP-Based Internets • RFC 1156 MIB • RFC 1157 SNMP • RFC 1213 SNMP MIB II • RFC 1350 TFTP • RFC 1643 Ethernet MIB • RFC 2030 SNTP • RFC 2616 HTTP • RFC 2665 Ethernet-Like Interface Types MIB • RFC 2674 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and Virtual Extensions • RFC 2819 RMON MIB • RFC 2863 Interfaces Group MIB • RFC 3164 Syslog • RFC 3414 User-Based Security Model (USM) for SNMPv3 • RFC 3418 MIB for SNMP • RFC 3636 Definitions of Managed Objects for IEEE 802.3 MAUs • RFC 4741 Base NETCONF protocol • RFC 4742 NETCONF over SSH • RFC 6241 Network Configuration Protocol (NETCONF) • RFC 6242 NETCONF over SSH • RFC 5277 NETCONF event notifications • RFC 5717 Partial Lock Remote Procedure Call • RFC 6243 With-Defaults capability for NETCONF • RFC 6020 YANG • Cisco private MIBs
- Management interfaces :• Web-based: HTTP/HTTPS • Command-line interface: Telnet, Secure Shell (SSH) Protocol, serial port • Cisco Prime Infrastructure
- Environmental conditions supported :Operating temperature: • 32° to 104°F (0° to 40°C) Note: The maximum temperature is derated by 1.0°C for every 1000 ft (305 m) of altitude above sea level. Nonoperating temperature: • –13° to 158°F (–25° to 70°C) Operating humidity: • 10% to 95% noncondensing Nonoperating humidity: • 0% to 95% noncondensing Altitude: • Operating altitude: 0 to 3000 m (0 to 10,000 ft) • Nonoperating altitude: 0 to 12,192 m (0 to 40,000 ft.) Electrical input: • AC input frequency range: 47 to 63 Hz • AC input range: 90 to 264 VAC Maximum power: • 9800-L-C max measured power = 86.9W (with 4.5W USB load) • 9800-L-F max measured power = 84.5W (assumes 2pc 2.5W SFP and with 4.5W USB load) Maximum heat dissipation: • 9800-L-C: 296.4 Btu/hr (with 4.5W USB load) • 9800-L-F: 288.2 Btu/hr (assumes 2pc 2.5W SFP and with 4.5W USB load) Sound power level measure: • Normal: 40 dBA at 25C • Maximum: 42.9 dBA at 40C Power adapter: • Input power: 100 to 240 VAC; 50/60 Hz
- Regulatory compliance :Safety: • UL/CSA 60950-1 • IEC/EN 60950-1 • AS/NZS 60950.1 • CAN/CSA-C22.2 No. 60950-1
- EMC - Emissions: • FCC 47CFR15 • AS/NZS CISPR 22 • CISPR 22 • EN55022/EN55032 (EMI-1) • ICES-003 • VCCI • KN 32 (EMI-2) • CNS-13438 :n/a
- EMC – Emissions: • EN61000-3-2 Power Line Harmonics (EMI-3) • EN61000-3-3 Voltage Changes, Fluctuations, and Flicker (EMI-3) :n/a