null

Cisco WS-X6716-10G-3CXL 16-Port 10 Gigabit DFC3CXL X2 6500 Switch Module

(No reviews yet) Write a Review
MPN:
WS-X6716-10G-3CXL
Condition:
Refurbished
Shipping:
Free Shipping
$799.00
REQUEST A QUOTE
Frequently bought together:

Description

WS-X6716-10G-3CXL Overview

WS-X6716-10G-3CXL consists of 16 X2 10 Gigabit Ethernet fiber ports line card module for Cisco Catalyst 6500 series only. WS-X6716-10G-3CXL equipped with WS-X6716-10G and WS-F6700-DFC3CXL and primarily designed for Supervisor Engine 720 with 3CXL daughter card to support Cisco 6500 Virtual Switching System (VSS) 1440. WS-X6716-10G-3CXL is ideally suited for LAN campus aggregation and data center access. Users can configure 4 port groups of 4 ports each, each port group in either oversubscription mode or performance mode. In performance mode, up to 4 10 Gigabit Ethernet ports can be used to create a virtual switch link in a VSS.

Quick spec of WS-X6716-10G-3CXL

  • Product Code : WS-X6716-10G- 3CXL
  • Feature : 16-Port 10GbE Fiber Module
  • Ports : 16
  • Optics : X2
  • Switch fabric connection : 40 Gbps (80 Gbps full duplex)
  • Oversubscription : 4:1
  • Forwarding engine : ●  WS-X6716-10G-3CXL: equipped with DFC3CXL for distributed forwarding, supporting 1 million routes
  • Queues : Oversubscription mode: ●  Receive: 1p7q2t per port ●  Transmit: 1p7q4t per port group Performance mode: ●  Receive: 8q4t per port ●  Transmit: 1p7q4t per port
  • Queuing mechanisms : ●  CoS-based queue mapping ●  DSCP-based queue mapping
  • Scheduler : Oversubscription mode: ●  DWRR ●  WRED Performance mode: ●  DWRR ●  WRED ●  SRR at egress
  • Port buffers : Oversubscription mode: ●  90 MB per port group Performance mode: ●  200 MB per port
  • Hardware-based multicast replication (Layer 2) : ●  Ingress and egress ●  Approximately 20 GB per replication engine ●  2 replication engines per module
  • Hardware-based multicast replication (Layer 3) : ●  Ingress and egress ●  Approximately 20 GB per replication engine ●  2 replication engines per module
  • Jumbo frame support for bridged and routed packets : Up to 9216 bytes
  • Maximum port density per chassis : 130 ports (9-slot chassis)
  • Maximum port density per VSS : 260 ports
  • Can be used to form virtual switch link : ●  Performance mode: Yes (supported in a subsequent software release) ●  Oversubscription mode: No
  • Supervisor engines supported : Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10GE uplinks or Supervisor Engine 720 with any PFC (chassis will work in lowest common denominator mode)
  • Chassis supported : ●  Any Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E, and C6509-NEB-A chassis with dual fan tray (NEBS compliant: operating temperature up to 55°C), or; ●  Non-E-Series chassis with fan tray 2, including Cisco Catalyst 6506, 6509, 6513, and C6509-NEB-A with single fan tray (non-NEBS compliant: operating temperature up to 40°C) ●  Not supported in Cisco Catalyst 6503 non-E Series chassis and 7600 Series chassis
  • Slot requirements : ●  Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E, or 6509-NEB-A chassis ●  Can occupy only slots 9 through 13 in a Cisco Catalyst 6513 chassis
  • Onboard memory : 1 GB default

WS-X6716-10G-3CXL Specification

  • Standard protocols :IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3ak, IEEE 802.3aq, and IEEE 802.3an
  • Physical specifications :
    •   Occupies one slot in the Cisco Catalyst 6500 Series chassis or Cisco 7600 Series chassis
    •   Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm)
    •   Weight: ◦   Cisco Catalyst 6708 and 6716: 13 pounds excluding X2 components; ¼ pound for each X2 ◦   Cisco Catalyst 6704: 10 pounds excluding XENPAK and DFC components; 2/3 pound for each XENPAK
  • Environmental conditions :
    • Operating temperature:
    •   Agency-certified for operation: 32 to 104°F (0 to 40°C)
    •   Design and tested for operation 32 to 130°F (0 to 55°C)
    •   Storage temperature: –40 to 167°F (–40 to 75°C)
    •   Relative humidity: 10 to 90 percent, noncondensing Operating altitude:
    •   Agency-certified for operation: –500 to 6500 ft (–150 to 2000m)
    •   Designed and tested for operation –500 to 10000 ft (–150 to 3000m)
  • Regulatory compliance :
    • Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards: EMC Standards:
    •   FCC Part 15 (CFR 47) Class A
    •   ICES-003 Class A
    •   VCCI Class A
    •   EN55022 Class A
    •   EN55024
    •   CISPR24
    •   CISPR 22 Class A
    •   AS/NZS CISPR 22 Class A
    •   ETS 300 386
    •   KN 22 Class A
    •   EN 50082-1
    •   EN61000-3-2
    •   EN61000-3-3
    •   EN61000-6-1
    •   CNS13438 Class A
    •   KN6100 -4 Series Safety Standards:
    •   UL 60950-1
    •   CAN/CSA C22.2 No. 60950
    •   EN 60950-1
    •   IEC 60950-1
    •   AS/NZS 60950-1
    •   IEC 60825 Class 1
    •   EN 60825 Class 1
    •   21CFR 1040
  • NEBS criteria levels :SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4)
  • ETSI :
    •   ETS 300 019-2-1, Class 1.1 Storage
    •   ETS 300 019-2-2, Class 2.1 and 2.2 Transportation
    •   ETS 300 019-2-3, Class 3.1E Stationary Use
  • Network management :
    •   ETHERLIKE-MIB (RFC 1643)
    •   IF-MIB (RFC 1573)
    •   Bridge MIB (RFC 1493)
    •   CISCO-STACK-MIB
    •   CISCO-VTP-MIB
    •   CISCO-CDP-MIB
    •   RMON MIB (RFC 1757)
    •   CISCO-PAGP-MIB
    •   CISCO-STP-EXTENSIONS-MIB
    •   CISCO-VLAN-BRIDGE-MIB
    •   CISCO-VLAN-MEMBERSHIP-MIB
    •   ENTITY-MIB (RFC 2037)
    •   HC-RMON
    •   RFC1213-MIB (MIB-II)
    •   SMON-MIB
  • Power requirements :
    •   WS-X6716-10T-3C: 509.3W (12.1A @ 42V)
    •   WS-X6716-10T-3CXL: 538.7W (12.8A @ 42V)
    •   WS-X6716-10G-3C: 457.8W (10.9A @ 42V)
    •   WS-X6716-10G-3CXL: 487.2W (11.6A @ 42V)
    •   WS-X6708-10G-3C: 444.36W (10.58A @ 42v)
    •   WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V)
    •   WS-X6704-10GE with DFC3CXL: 362.46W (8.63A @ 42V)
    •   WS-X6704-10GE with DFC3C: 333.06W (7.93A @ 42V)
    •   WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V)
    •   WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V)
    •   WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V)
    •   WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V)
  • Indicators :
    •   Status: green (operational), red (faulty), and orange (module booting)
    •   Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected)
View AllClose

Videos

View AllClose

Contact

Warranty:
365 days
CALL:
877-263-8436
E-MAIL:
sales@networkgenetics.net
View AllClose

Related Products

Product Overview The Cisco Catalyst 6500 Series Switches offer a variety of 10 Gigabit Ethernet modules to serve different needs in the campus and data center for enterprise, commercial, and service provider customers: the Cisco Catalyst 6500 16-port 10 Gigabit Ethernet Copper Module, 16-port 10 Gigabit Ethernet Fiber Module, 8-port 10 Gigabit Ethernet Fiber Module, and 4-port 10 Gigabit Ethernet Fiber Module. The copper module supports RJ-45 connectors and provides operational distance of up to 100m over Category 6, 6A, and 7 type cabling. The fiber modules support pluggable optics and provide operational distances of up to 80 km over single-mode fiber and 300m over multimode fiber. 16-Port 10 Gigabit Ethernet Fiber Module The 16-port 10 Gigabit Ethernet fiber module (Figure 2) provides up to 130 10 Gigabit Ethernet ports in a single Cisco Catalyst 6509 chassis and 260 10 Gigabit Ethernet ports in a VSS and is designed for LAN campus aggregation and data center access, where fanout and port density are very important. It consists of 4 port groups of 4 ports each. Users can operate each port group in either oversubscription mode (2 to 4 ports used per port group) or performance mode (1 port used per port group), providing the flexibility to use some ports for connection to servers in performance mode and others for uplinks to wiring closets in oversubscription mode. In performance mode, up to 4 10 Gigabit Ethernet ports can be used to create a virtual switch link in a VSS.In addition, the 16-port 10 Gigabit Ethernet module has reduced power consumption. It uses half the power per port of the 8-port 10 Gigabit Ethernet module, providing substantial power savings to the customer. WS-X6716-10G-3C Cisco Catalyst 6500 16-Port 10 Gigabit Ethernet Module with DFC3C
Choose Options
Quick view

WS-X6716-10G-3CXL

Cisco

$1,750.00
WS-X6716-10G-3CXL OverviewWS-X6716-10G-3CXL consists of 16 X2 10 Gigabit Ethernet fiber ports line card module for Cisco Catalyst 6500 series only. WS-X6716-10G-3CXL equipped with WS-X6716-10G and...