Cisco Catalyst WS-C2960XR-48FPD-I - Switch-48Port-PoE x10/100/1000-Lifetime WRNT

(No reviews yet) Write a Review

MPN:

WS-C2960XR-48FPD-I

Condition:

New

Shipping:

Calculated at Checkout

Description
Contact

Description

WS-C2960XR-48FPD-I-New Overview

Cisco Catalyst 2960-XR series switches offer power resiliency with optional dual field-replaceable power supplies and IP Lite Cisco IOS software with dynamic routing and Layer 3 features. WS-C2960XR-48FPD-I is one of 2960-XR switches, IP Lite switch, supporting forty-eight 10/100/1000 Ethernet ports with POE+ and two 10G SFP+ uplink interfaces. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM stub, etc.

Quick spec of WS-C2960XR-48FPD-I-New

Product Code : WS-C2960XR-48FPD-I
Enclosure Type : Rack-mountable - 1U
Feature Set : IP Lite
Uplink Interfaces : 2 x 10G SFP+
Ports : 48 x 10/100/1000 (POE+)
Available PoE Power : 740W
Forwarding Bandwidth : 108Gbps
Maximum stacking number : 8
Stack bandwidth : 80G
Switching Bandwidth : 216Gbps
RAM : 512 MB
Flash Memory : 128 MB
Dimensions : 44.5 cm x 40.8 cm x 4.45 cm

WS-C2960XR-48FPD-I-New Specification

Enclosure type :Rack-mountable - 1U
Ports :48 x 10/100/1000 (POE+) + 2 x 10 Gigabit SFP+
Network management Interface :10/100 Mbps Ethernet (RJ-45)
Available PoE Power :740W
Forwarding bandwidth(Gbps) :108Gbps
Maximum stacking number :8
Stack Bandwidth :80G
Forwarding Performance :130.9Mpps
Switching bandwidth :216Gbps
Maximum active VLANs :1023
MAC Address Table Size :16K (default)
CPU :APM86392 600MHz dual core
RAM :512 MB
Flash Memory :128 MB
Status Indicators :
- Per-port status: Link integrity, disabled, activity, speed, and full duplex
- System status: System, RPS, PoE, Stack link status, link duplex, and link speed
Console ports :USB (Type-B), Ethernet (RJ-45)
Expansion Slot(s) :1 FlexStack-Plus slot and 1 power redundant slot
Stack Modules :C2960X-STACK
Stacking cable :
- CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length
- CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length
- CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length
Power supply :PWR-C2-250WAC
Power Device :Power supply - redundant - plug-in module
Power Redundancy :optional
Voltage range (Auto) :110V-240V
Power Consumption Operational :0.89kVA
Width :17.5 Inches (44.5 cm)
Depth :16 Inches (40.8 cm)
Height :1.75 Inches (4.45 cm)
Weight :14.6 Pounds (6.6 Kg)
Rack Mounting Kit :Optional
MTBF in hours :231,590
Compliant Standards :
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1p CoS Prioritization
- IEEE 802.1Q VLAN
- IEEE 802.1s
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab (LLDP)
- IEEE 802.3ad
- IEEE 802.3af and IEEE 802.3at
- IEEE 802.3ah (100BASE-X single/multimode fiber only)
- IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- RMON I and II standards
- SNMP v1, v2c, and v3
- IEEE 802.3az
- IEEE 802.3ae 10Gigabit Ethernet
- IEEE 802.1ax
System software :IOS IP Lite
license :ENERGY-MGMT, ENERGY-MGT-100-K9
features :
- IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and EIGRP-Stub)
- Advanced IP unicast routing protocols (OSPF for Routed Access)
- EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite.
- Equal-cost routing
- Policy-based routing (PBR)
- Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
- Protocol Independent Multicast (PIM)
Network security :
- MAC-based VLAN assignment enables
- Cisco TrustSec uses
- Comprehensive 802.1X
- IPv6 First-Hop Security
- Device Sensor and Device Classifier
- Cisco Trust Anchor Technology
- Cisco Threat Defense
- Private VLANs
- Unicast Reverse Path Forwarding (uRPF)
- Multidomain Authentication
- Access Control Lists (ACLs)
- Switched Port Analyzer (SPAN)
- Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3)
- TACACS+ and RADIUS authentication
- MAC Address Notification
- Multilevel security on console access BPDU Guard
- Spanning Tree Root Guard (STRG)
- IGMP filtering
Management & Troubleshooting :
- Auto-MDOX
- TDR
- UDLD
- IP SLA Responder
- layer 2 / IP Traceroute
- SPAN
- RSPAN
- Express Setup
- Device Manager
- Cisco Network Assistant
- Smartports + Advisor
- Troubleshooting Advisor
- Drag-and-drop Cisco IOS Upgrade
- IP Address DHCP
- Autoinstall with saved configuration
- Configuration Replace
- DHCP Auto Image Upgrade
- DHCP Port Based Allocation
- Error Disable MIB
Technical Support and Services :
- Cisco SMARTnet Service
- Cisco Smart Foundation Service
- Cisco Smart Care Service
- Cisco SP Base Service
- Cisco Focused Technical Support Services
Operating temperature up to 5000 ft (1500 m) :23ºF to 113º (-5ºC to 45ºC)
Operating temperature up to 10,000 ft (3000 m) :23ºF to 104ºF (-5ºC to 40ºC)
Short-term exception at sea level* :23ºF to 131ºF (-5ºC to 55ºC)
Short-term exception up to 5000 feet (1500 m)* :23ºF to 122ºF (-5ºC to 50ºC)
Short-term exception up to 10,000 feet (3000 m)* :23ºF to 113ºF (-5ºC to 45ºC)
Short-term exception up to 13,000 feet (4000 m)* :23º to 104ºF (-5ºC to 40ºC)
Storage temperature up to 15,000 feet (4573 m) :-13º to 158ºF (-25º to 70ºC)
Operating altitude :Up to 10,000 (Up to 3000 Meters)
Storage altitude :Up to 13,000 (Up to 4000 Meters)
Operating relative humidity :10% to 95% noncondensing
Storage relative humidity :10% to 95% noncondensing