Cisco ASR-9006-AC-V2 ASR 9000 Series 9006 AC Router Chassis w/ PEM Version 2

Quick spec of ASR-9006-AC-V2

• Model : ASR-9006-AC-V2
• Type : Cisco ASR-9006 AC Chassis with PEM Version 2
• ASR 9006 Specs :
• Slots : 4 Line Cards 2 RSPs
• Rack Size : 10 RU
• Max Capacity : 7 Tbps
• Size (H x W x D) : 17.5 in. x 17.5 in. x 28.65 in.
• Power : AC: 3 kW power module DC: 1.5 kW or 2.1 kW power modules Note: Mixing of AC and DC modules is not supported
• Fan : 2 fan trays
• Airflow : Side to Side (Front to Back Option)
• RSP / RP : 2 (1+1 RSP redundancy)
• Fabric Architecture : 1+1 fabric redundancy
• Software : IOS XR

ASR-9006-AC-V2 Specification

• Description :Cisco ASR 9006 System ASR-9006-AC-V2 ASR 9006 AC Chassis with PEM Version 2
• Physical specifications :
  • Height: 17.50 in. (444.5 mm) (10 RU) Width: 17.38 in. (441.45 mm) Depth:
  •   With doors: 29.05 in. (737.9 mm)
  •   Without doors: 29.05 in. (737.9 mm) Weight:
  •   89.55 lb (40.7 kg) (chassis with PEM) 150 lb (65.91 kg) (fully loaded, excluding line cards and power modules) – RSP, two v2 FAN trays, PEMs
• Slot orientation :Horizontal
• Cisco ASR 9000 Series RSP :Dual redundant RSPs with integrated fabric in 2 slots
• Cisco ASR 9000 Series line cards :4 line-card slots
• “Commons” components :2 RSPs 2 fan trays 1 PEM (either DC or AC) 1 fan filter
• Reliability and availability :Fabric redundancy Fan redundancy Feed redundancy Power-supply redundancy RSP redundancy Software redundancy
• Rack mounting :19-in. default 21- and 23-in. adapters available Note: Minimum 17.75-in. opening between posts is needed for proper operation
• Cabinet mounting :Yes Note: Doors not recommended in enclosed cabinets
• Wall mounting :No
• Airflow :Right-to-back, Front-to-back with baffle
• Fabric :
  • One per RSP:
  •   Active/active nonblocking operation mode in dual-RSP redundant configuration
  •   Fully redundant in dual-RSP redundant configuration
  •   Built-in service-intelligence and traffic-prioritization capability
• Thermal :
  • Two fan trays:
  •   6 high-efficiency fans per tray
  •   Variable-speed fans for optimal thermal performance
  •   No single point of failure
• Modularity :
  • Pay-as-you-grow power for future scalability, available in AC and DC. Multiple power module types:
  •   3 kW AC power module
  •   2.1 kW DC power module Note: Mixing of AC and DC modules is not supported
• Redundancy :
  •   AC: N+N redundancy
  •   DC: N+1 redundancy
  •   Power module redundancy
  •   A/B Feed redundancy
• Power zones :No power zone restrictions Fully load-sharing power infrastructure
• Power input :Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum) Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum)
• Power-module airflow :Front-to-back
• Operating temperature (nominal) :41 to 104ºF (5 to 40ºC)
• Operating temperature (short-term) :ASR 9006: 23 to 131ºF (-5 to 55ºC) ASR 9010: 23 to 122ºF (-5 to 50ºC)
• Operating humidity (nominal) (relative humidity) :5 to 90%
• Storage temperature :-40 to 158ºF (-40 to 70ºC)
• Storage (relative humidity) :5 to 93%
• Operating altitude :-60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)
• Network Equipment Building Standards (NEBS) :
  • Cisco ASR 9006 is designed to meet:
  •   SR-3580: NEBS Criteria Levels (Level 3)
  •   GR-1089-CORE: NEBS EMC and Safety
  •   GR-63-CORE: NEBS Physical Protection
  •   VZ.TPR.9205: Verizon TEEER
• ETSI standards :
  • Cisco ASR 9006 is designed to meet:
  •   EN300 386: Telecommunications Network Equipment (EMC)
  •   ETSI 300 019 Storage Class 1.1
  •   ETSI 300 019 Transportation Class 2.3
  •   ETSI 300 019 Stationary Use Class 3.1
• EMC standards emission :
  • Cisco ASR 9006 is designed to meet:
  •   FCC Class 47CFR15 A
  •   ICES 003 Class A
  •   AS/NZS CISRP22 Class A
  •   CISPR 22 (EN55022) Class A
  •   VCCI Class A
  •   BSMI Class A
  •   IEC/EN 61000-3-12: Power Line Harmonics
  •   IEC/EN 61000-3-11: Voltage Fluctuations and Flicker
  •   EN55022: Information Technology Equipment (Emissions)
  •   EN 50121-4: Railway EMC
• EMC standards immunity :
  • Cisco ASR 9006 is designed to meet:
  •   IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
  •   IEC/EN-61000-4-3: Radiated Immunity (10V/m)
  •   IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
  •   IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
  •   IEC/EN-61000-4-5: Signal Surge Ports (1kV)
  •   IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)
  •   IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
  •   IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
  •   IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
  •   EN55024: Information Technology Equipment (Immunity)
  •   EN50082-1/EN-61000-6-1: Generic Immunity Standard
  •   EN 50121-4: Railway EMC
• Safety :
  • Cisco ASR 9006 is designed to meet:
  •   UL/CSA/IEC/EN 60950-1
  •   IEC/EN 60825 Laser Safety
  •   ACA TS001
  •   AS/NZS 60950
  •   FDA Code of Federal Regulations Laser Safety