Brocade ICX6610-24P-PE 24 Port Gigabit Ethernet 8 Port SFP Network Switch

Brocade ICX6610-24P-PE 24 Port Gigabit Ethernet 8 Port SFP Network Switch

The ICX6610-24P-PE is part of the Brocade ICX 6610 Series switches (now a part of Ruckus Networks, owned by CommScope). This switch is designed for high-performance enterprise and campus networks, providing a rich feature set, high availability, and PoE capabilities. The ICX6610-24P-PE offers a versatile, high-performance solution for enterprise and campus networks that need robust PoE support, high throughput, and flexible uplink and stacking options. Here are the detailed specifications for the ICX6610-24P-PE:

Specifications:

• Model: Brocade/Ruckus ICX6610-24P-PE
• Switch Type: Fixed configuration, stackable Layer 2/Layer 3 switch.
• Form Factor: 1 RU (Rack Unit).
• Port Configuration:
• Downlink Ports:
• 24 x 10/100/1000 Mbps RJ-45 ports with Power over Ethernet (PoE/PoE+).
• Uplink Ports:
• 8 x SFP+ (1/10 Gbps) ports.
• 4 x 40 Gbps QSFP+ ports for stacking or uplink (can also be used as uplink ports, offering flexible deployment).
• PoE (Power over Ethernet):
• PoE/PoE+ Support:
• Provides PoE (802.3af) and PoE+ (802.3at).
• Max PoE Budget: 1,500W.
• Each port supports up to 30W per port for PoE+ devices such as wireless access points, IP phones, and security cameras.
• Performance:
• Switching Capacity: 576 Gbps.
• Forwarding Rate: 432 Mpps (Million packets per second).
• Stacking Bandwidth: Up to 320 Gbps stacking bandwidth using the QSFP+ ports.
• Latency: Low-latency switching for enterprise environments.
• Stacking:
• Stacking Support:
• Supports Brocade/Ruckus stacking technology, which allows stacking of up to 8 units into a single logical switch.
• Stacking is achieved via the 4 x 40 Gbps QSFP+ ports, delivering up to 320 Gbps of stacking bandwidth.
• Mix and match ICX 6610 models in the same stack.
• Layer 2 and Layer 3 Features:
• Layer 2:
• VLAN support (802.1Q VLAN tagging) with up to 4,094 VLANs.
• STP (Spanning Tree Protocol), including RSTP and MSTP.
• Link Aggregation Control Protocol (LACP) for bundling multiple physical links into one logical link.
• Layer 3:
• IPv4 and IPv6 routing (OSPF, RIP, VRRP, PIM-SM).
• Static and dynamic routing, including OSPF, RIP, VRRP.
• Policy-based routing (PBR).
• IPv6 support: IPv6 unicast and multicast routing.
• Multicast routing support: IGMP, PIM (sparse and dense mode).
• Advanced Features:
• Quality of Service (QoS):
• Advanced QoS with traffic classification, policing, marking, and shaping.
• Support for 8 hardware queues per port for priority-based traffic handling.
• Security Features:
• Access Control Lists (ACLs) based on Layer 2, Layer 3, and Layer 4 parameters.
• Port security and DHCP snooping.
• 802.1X authentication for network access control.
• Control Plane Policing (CoPP) to protect against DoS attacks.
• Management and Monitoring:
• Management Interfaces:
• 1 x 10/100/1000 RJ-45 Ethernet management port.
• 1 x USB Type-A port for storage and file transfer.
• Management Features:
• Web-based management, CLI (Command Line Interface), and SNMP for remote management.
• Support for RMON (Remote Monitoring) and sFlow.
• Network management integration with tools such as Ruckus SmartZone, Ruckus Cloud, and Brocade Network Advisor.
• Zero Touch Provisioning (ZTP) for automated deployment.
• Environmental and Power:
• Power Supply:
• Dual redundant, hot-swappable power supplies.
• Includes Power over Ethernet (PoE) and PoE+ (802.3at).
• Cooling: Front-to-back airflow with redundant fans for cooling.
• Power Consumption: Varies based on the PoE load and traffic.
• Operating Temperature: 0°C to 40°C (32°F to 104°F).
• Operating Humidity: 5% to 95% non-condensing.
• Dimensions and Weight:
• Dimensions: 1.73 x 17.3 x 16 inches (4.4 x 43.9 x 40.6 cm).
• Weight: Approximately 17.6 pounds (8 kg).
• Use Cases:
• Enterprise Edge/Access Layer: The switch is ideal for deployment in high-density enterprise access networks, providing PoE+ for IP phones, access points, and cameras.
• Campus Networks: With its stacking capabilities and high-performance uplinks, it fits well in campus network architectures.
• Power-Hungry Environments: The high PoE budget makes it suitable for environments that require powering a large number of PoE/PoE+ devices.
• Key Features:
• High PoE Budget: With a maximum of 1,500W PoE budget, it supports a wide range of PoE+ devices.
• Advanced Stacking: Supports high-performance stacking with up to 320 Gbps of stacking bandwidth.
• Rich Layer 2 and Layer 3 Features: Includes both Layer 2 switching and Layer 3 routing with robust security, QoS, and multicast support.
• Flexible Uplinks: Equipped with 8 SFP+ uplinks (supporting 1/10 Gbps) and 4 QSFP+ uplinks (supporting 40 Gbps or stacking).